Contact Platform Support
Help CenterSteel Cut To Length Line For Stainless Curling Board 2mm Thick ,900mm Width
Related Products
-
Automatic Steel Cut To Length Line For Hot Rolled Steel , 0-50m/min Line SpeedNegotiableMOQ: 1 Piece -
Automatic Steel Cut To Length Line For CR , 0-30m/min Line SpeedNegotiableMOQ: 1
-
Steel Cut To Length Line For Steel Coil , 2mm Thick ,500mm WidthUS$ 15000 - 20000MOQ: 1 Piece
-
Simple Automatic Steel Cut To Length Line For Carbon Cold SteelNegotiableMOQ: 1 Square Meter
-
Metal Steel Cut To Length Line For Coil Sheet , 6mm Thick ,600mm WidthNegotiableMOQ: 1 Piece
applied to:carbon cold and hot rolled steel thickness:2mm: Width(max):900mm Weight:6T Line speed:0-50m/min
Steel Cut To Length Line For Stainless Curling Board 2mm Thick ,900mm Width
Specifications:
|
applied to |
carbon cold and hot rolled steel |
|
material quality |
first class steel coils of the international standard |
|
tensile strength |
δb≤450Mpa |
|
thickness |
2mm |
|
Width(max) |
500mm |
|
slitting width tolerance |
±0.05mm |
|
Coil ID |
508mm |
|
Coil OD |
1400mm |
|
Weight |
5T |
|
diameter of leveling rollers |
φ50 |
|
distance of leveling rollers |
54 |
|
material of leveling roller |
GCr15,hardness:HRC55-60 |
|
total weight of machines |
around 5T |
|
diagonal tolerance |
≤±2mm/2000mm |
|
length tolerance |
≤±1mm/2000mm |
|
Line speed |
0-30m/min |
|
Power |
380V/50Hz/3Ph |
|
capacity |
around 22.5Kw |
Description:
Composed devices
1. decoiler
◆supporting steel rolls and uncoiling.
◆the core can ensure the expand range φ510 of the coils inner diameter
◆It adopts the hydraulic oil cylinder to make the decoiler expandable and fit to the inner diameter of coils. It is equipped with the cantilever .
◆can do forward and reverse running as well as do the decoiling with tension.
2. straightening machine
◆It is controlled by servo electromotor and used to regulate for high speed feed and precise length control
◆The operation is done at the control table with programmable control.
◆Drive model:15kw servo motor with precise decelerating transmission and synchronous to transport the belt to feed rollers
3．cutter
◆shear model: cut from up to down hydraulically which is cooperate with the signal direct from the feeder and shear automatically
◆Adopt gap adjusting design to cut the materials and can shear 3mm steel plate safely after heat treatment
4. hydraulic system
◆Ensure the using of every hydraulic parts
◆6.3-16Mp The working pressure of the hydraulic system is 6.3-16Mpa
5. electrical system
◆Adopt the PLC control mode ,It is controlled by LCD screen with fixed-length cutting by codes and count automatically .
Applications:
The production line is to cut cold steel rolling curling board,stainless curling board,aluminium curling intn different sizes of board materials
Competitive Advantage:
High cost performance, easy to operate
Send Inquiry to This Supplier
You May Also Like
-
Pressure VesselNegotiableMOQ: 2700 Sets
-
Zirconium Wire Mesh for Chemical Reactor Catalyst Support 600°C Corrosion ProofNegotiableMOQ: 1 Square Meter
-
Customized Factory Direct Water Weed Cutting Boat In The RiverUS$ 30,000 - 100,000MOQ: 1 Set
-
YDS Cryogenic Container/tank/dewar for Liquid NitrogenUS$ 168 - 678MOQ: 1 Piece
-
SS304 Two Motions Reactor Vessels With PlatformUS$ 1,000 - 10,000MOQ: 1 Set
-
Plastic Diesel Oil Tanks , Fuel TanksUS$ 25 - 85MOQ: 1
-
Pressed Carbon Steel Shell Segment for Pressure VesselUS$ 500 - 10,000MOQ: 1 Set
-
Stainless Steel SS304 316L ReactorUS$ 2,000 - 50,000MOQ: 1 Set
-
Safe SF6 Gas Cylinder With Different Voloume Liter and kgUS$ 350 - 520MOQ: 1 Piece
-
Alloy 400 1800 Psi Single Ended 1/8 1/8" Female NPT Gas Sample CylindersUS$ 150 - 300MOQ: 1 Piece
