Contact Platform Support
Help Center75KW Behind Feeding Dispersion Kneader Machine For Chemical Industry
Related Products
-
110KW PP PVC EVA Dispersion Kneader Machine For Rubber / PlasticNegotiableMOQ: 1 Metric Ton -
35L 14055KW Dispersion Kneader Machine Banbury Mixer For Raw RubberNegotiableMOQ: 1 Set
-
Automatic PLC Pressurized Rubber Kneader Dispersion Kneader MachineNegotiableMOQ: 1 Piece
-
110L Pressurized Rubber Dispersion Kneader Machine For RubberNegotiableMOQ: 1 Set
-
Pneumatic Pressure 75L Banbury Mixer Machines With PLC Control SystemNegotiableMOQ: 1 Square Meter
Certification:ISO9001:2000
75KW Behind Feeding Dispersion Kneader Machine For Chemical Industry
Summary:
This banbury mixer has a wide application of applications, including in mixing raw material, such as raw rubber, synthetic rubber, resin, asphalt, celluiese, PP, PVC or EVA into even mixed stock. The body and structure of this machine is strong and durable, making it suitable for heavy-duty mixing and refining operation. Dust stop device has been specially designed to effectively prevent leakage of raw materials and other ingredients. Long service life, simple operation, easy maintenance, convenient replacing of worn-out parts, it is an ideal mixing equipment for heavy-duty usage.
Descrition:
1. An automatic temperature and time control system to provide a 100% mixing effect.
2. Easy to clean chamber and changing colors.
3. In 6~10 minutes/batch of output equivalent to 2 units of mixing Roller.
4. Pressurized and sealed mixing chamber to provide high mixing performance and prevented environmental pollution.
Applications:
Pressurized Rubber Kneader is Used For Rubber and Plastic & Chemical Industry
Most Suitable Kneading Application For Dispersion Kneader:
E. V. A. Rubber & TPR, Sole, Rubber Roller, Hoses Belts, Sponges, Vibration Insulator, Elastic Cord, Sealing Materials, Tire, Tapes, Master Batches, Pigment Ink, Automobile&Electric Rubber Parts, Chemical Industry Compounds.
Specifications:
|
Technical Parameter |
Program |
Specification |
|
model |
X(S)N-55 |
|
|
Net chamber volume |
125 Liter |
|
|
Working volume of the chamber |
55 L |
|
|
Main motor |
75KW |
|
|
Brake motor |
3.75KW |
|
|
Cylinder diameter |
Ø300mm |
|
|
Speed of rotating rotor(front/rear) |
30/24.5r/min |
|
|
Tilting angle |
140° |
|
|
Cooling water pressure |
0.3~0.4 Mpa |
|
|
Air compressor power needed |
5.5KW |
|
|
Type of feeding |
Feeding from behind |
|
|
Overall dimension(L×W×H) |
3250×2570×3000 |
|
|
Overall weight |
7800KG |
Features for our dispersion Kneader:
1).Rubber& plastic and other additives in a sealed pressurized and temperature controlled conditions, for rubber mixing or plastic mixing, with high efficiency, materials uniformly dispersed, high quality and no environment pollution. It is very easy to change batch materials, color, and clean.
2). Rotor shaft, and pressure lid and other parts are jacket structure. If the temperature is too high for materials, put through the cooling water for cooling. With electric heater at the bottom of mixing chamber to meet the technological requirements of plastic mixing. The materials processed feature good and stable quality.
3). Spiral angle and working length of the rotor convex edge are designed perfectly reasonable, to achieve the best materials dispersion effect. The rotor edge wing is wear-resistance hard cast alloy welded. All mixing chamber, rotor, and pressure lid that directly contact with the materials by polished after the hard chromium plating, wear-resistant and anti-corrosion.
4). Rear feeding(feeding from behind), mixing room turn forward 140 ° discharge, it not only can facilitate the production process from top to bottom process connection, but also facilitate the observation and cleaning of mixing chamber and the rotors.
5).The junction place between upper side of mixing chamber and rack cantilever, using curved plate labyrinth pressure seal structure and effective dust seal. Embedded tungsten cobalt titanium alloy movable coil at the rotor end is contacting with the copper filled PTFE seal
Send Inquiry to This Supplier
You May Also Like
-
30T Hydraulic Sheet Metal Stamping Welding Assembly Press With Automatic Feeder and 12m/min Line SpeedNegotiableMOQ: 50 Pieces
-
Acrylic CNC Polishing Machines for Furniture IndustryNegotiableMOQ: 1 Set
-
CNC Machine ToolsNegotiableMOQ: 2300 Sets
-
Gantry Five Axis CNC Milling Machine, 3,000x2,000x800mm Capacity, 30kW Spindle, Designed for Mold and Die IndustryNegotiableMOQ: 1 Unit
-
Ball Mill Parts Factory Direct, 24H Technical Support, Hardness HRC55-60, Free ReplacementUS$ 1000MOQ: 1 Combo
-
Medical-Grade CNC Machining for Stainless Steel & Titanium Alloy ComponentsNegotiableMOQ: 500 Pieces
-
Custom Metal Material Processing for Electronic & Hardware PartsNegotiableMOQ: 50 Pieces
-
OEM Customized Stainless Steel Aluminum CNC Machining PartsNegotiableMOQ: 1
-
High Precision Machining Products of Stainless Steel Made in ChinaUS$ 1.5 - 1.5MOQ: 1000 Kilograms
-
Stainless Steel Welding Tee Pipe FittingsUS$ 0.9 - 0.9MOQ: 200 Pieces
