Contact Platform Support
Help CenterRtv Liquid Silicone Rubber for Pad Printing Silicone Pads for Printing Pattern on Toys
Related Products
-
Environmental-friendly Chinese Factory Direct Sold Food Grade RTV-2 Liquid Silicone Rubber For Insole MakingUS$ 8 - 12MOQ: 200 Kilograms -
RTV-2 Liquid Electronic Potting Silicone Compound LED Products Silicone RubberUS$ 7 - 13MOQ: 200 Kilograms
-
RTV-2 Tin Cure Silicone Rubber for Gypsum Casting Cornice Moulds MakingUS$ 8 - 12MOQ: 200 Kilograms
-
Platinum Cure RTV-2 Life Casting Silicone Liquid Good Quality Rtv-2 for Artifical PenisUS$ 8 - 12MOQ: 200 Kilograms
-
100% Platinum Cure 2 Part Rtv Silicon Mold Making Rubber for Concrete Artificial Stone MoldUS$ 8 - 13MOQ: 1 Kilogram
| Application | Pad Printing |
| Color | Red |
| Certificate | FDA |
| Product name | Pad Printing silicone rubber |
| Appearance | Flowing Liquid Silicone Rubber |
| Item | DC-P33 |
| Mixing ratio | 9:1 |
| Hardness | 33 shore A |
| Usage | printing |
| Features | without any impurity |
| Product Keywords | rtv liquid silicone rubber for pad printing,pad printing silicone rubber |
The DC-A Series Addition cure silicone rubber is mainly used for making molds of concrete stone, GRC, polyurethane products ; wax, candle decoration; rapid prototyping and tire molds; chocolate, candy and similar products' molding. and also can used for life casting.
DC-A Series with different hardness from 0-50 shore A, small size product with detailed pattern we suggest your use low hardness such as 10-20A,for middle or large size product with pattern you can choose 25-35A, and for big size with little detail you can use 40-50 shore A hardness
Operation Instructions
Step 1: Prepare an perfect original mold and clean it totally before operation.
*Notes: Make sure your original molds and operation tool were cleaned up totally to avoid uncured problem .
Step 2: Take 100 G part A and 100 G part B (Or 100 G part A and 10 G part B) and mix them evenly.
*Notes: Addition cure mold making silicon rubber is two parts flowing liquid, Pls follow the step strictly:
1.Weigh the two part exactly by electronic weight. If any part not in exactly weight, it may cause changing of hardness, or even cause uncured problem.
2.Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified and this will give birth to difficulties in your final operation. What’s more, the finished molds will meet a short life. All of these will cause a waste of silicone rubber.
Step 3: Vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
Step 4: Pouring casting or Brush operation
*Notes:1. For simple pattern products we suggest use pouring operation way, which will be very easy to operate and demould. Pourable silicone require low viscosity which will be easy to flow smoothly and easy to de-air .
2.For delicate pattern products we suggest use brushing operation way, which can copy the pattern exactly. Brushable silicone require high viscosity which won’t be easy to flow away and easy to brush .
3. We suggest to set the silicone mold for another 12 hours after demould before you put it into a large production .
Warm Tips :
As addition cure silicone is a kind of platinum cure system, which will be easy to cause uncured problem ,so pls kindly follow the tips as below :
*Do not mix with liquid condensation silicone rubber or even the tool which used for condensation silicone rubber.
*Do not mix with organic matter which contains N, S, P organics and ionic compound like Sn, As,Hg, Ph. (Do not smoke when you use this addition silicone rubber)
*Do not add any pigment or powder into the addition cure silicone rubber without any testing to prevent uncured problem.
SHELF LIFE:
12 months when stored under 25°C in original unopened packages.
Package & Shipping
1. 1:1 mix ratio: 20KG/drum + 20KG/drum with vacuum packing ;
200KG/drum + 200KG/drum packing
2.10:1 mix ratio: 20KG/drum + 1KG/bottle with vacuum packing
200KG/drum + 20KG/drum with vacuum packing
Techinical Support
Normally, different silicone should be choosed according to different product's features,for example :
- For products size (within 20cm),
with intricate disigns, soft silicone is suitable, such as 10-20 shore A.
- For products size (20cm-80cm),
with intricate designs, 20-25 shore A is suitable.
with simple designs, 25-30 shore A is suitable.
- For products size (80cm-150cm),
with intricate designs, 25 shore A is suitable.
with simple designs, 30-35 shore A is suitable.
- For products size (more than 150cm),
with intricate designs, 25-28 shore a A is suitable.
with simple designs, 35-40 shore A is suitable.
Company Information
Shenzhen Zhihua Chemical Co., Ltd.(DC SILICONE) waswas established in 2008,is a science and technology Company which is concentrating on production, R&D, and sales of Chemical products, especially silicone rubber. We are praised as the leading professional manufacturer of Mould Making Silicone Rubber,Addition Silicone Rubber,Life Casting Silicone Rubber,Electronic Potting Compound,Pad Printing Silicone Rubber,and so on.we are welcome to all the customers come to visit our factory and have a fruitful bussiness relationship.
FAQ
Q: Do you have a factory?
A:We have factory in Shenzhen. As a leading manufacturer of silicone rubber in China, we are standing in silicone field for nearly 10 years, depends on our high quality products and best service.
Q:How can I get the samples?
A:1,We are honored to offer you samples. Testing is believing. So we can provide you 1kg free sample by air. The silicone sample is free for you, and you should only pay the small part of shipping cost by air. But when we have a successful cooperation in the future we will return the air shipping cost you paid before.
Q: How about the lead time?
A: Within10-20 days after getting the prepayment.
Q: How can we pay?
A: For small sample shipping cost, you can pay either by paypal or western union or by T/T.
Q: Can you do CO, Form E, Form F, Form A etc?
A: Yes, we can do them for you without extra cost. We are always finding ways to save cost for you.
Any question pls do not hesitate to contact Ms. Emily
Send Inquiry to This Supplier
You May Also Like
-
RTV2 Silicone for Plaster Ornaments Molding (RTV525)US$ 8 - 13MOQ: 1 Kilogram
-
Wholesale Prices Liquid Silicone Rubber 2 Part 1:1 Food Grade for Moulding LSRUS$ 8 - 13MOQ: 1 Kilogram
-
Pad Printing Silicone RubberUS$ 0.1 - 0.4MOQ: 1000 Pieces
-
Pad Printing Silicon RubberUS$ 1 - 100MOQ: 10 Sets
-
Durable Pad Printing Silicone RubberUS$ 4.68 - 8.88MOQ: 200 Kilograms
-
PM-23 Pad Printing Silicone Rubber PadNegotiableMOQ: 1 Set
-
Rtv Liquid Silicone Rubber for Pad Printing Silicone Pads for Printing Pattern on ToysUS$ 9 - 17MOQ: 200 Kilograms
-
Good Price Rtv Liquid Pad Printing Silicone RubberUS$ 5 - 7MOQ: 100 Kilograms
-
Good Price Rtv Liquid Pad Printing Silicone RubberUS$ 7 - 9MOQ: 1 Kilometer
-
Pad Printing Silicone Rubber Tampo Printing Head Wear Resistance Good Printing EffectUS$ 0.2 - 1.5MOQ: 1 Kilogram