Contact Platform Support
Help CenterPneumatic Safety Chuck Alternative Boschert
Related Products
-
Pneumatic Foot Mounted Safety Chuck With Load BeamUS$ 2000 - 8000MOQ: 1 Set -
Pneumatic Safety Chuck for Roller Rewinding and UnwindingUS$ 2000 - 8000MOQ: 1 Set
-
Steel Strip Type Pneumatic Extend Shaft for Paper RollerUS$ 200 - 1000MOQ: 1 Set
-
Aluminum Alloy Pneumatic Expansion Shaft for Paper CoreUS$ 200 - 1000MOQ: 1 Set
-
Flange Type Safety Chuck for Textile MachineUS$ 200 - 1000MOQ: 1 Set
Pneumatic safety chuck alternative Boschert
Pneumatic safety chuck is an automatic mode, it is driven by air pressure. Handong made pneumatic safety chuck with high precision and superior quality, it can replace Boschert's air chuck well.
Automatic pneumatic safety chuck is driven by air pressure, it can be moved left and right automatically. It is usually used with lug or strip air shaft for rolling. After input air pressure, this safety chuck reel mouth will be open automatically, then the shaft roller can be putted into it, when exhausting air pressure, this safety chuck will be closed, so as to make sure the shaft roll will not slippage and rotating in safe.
Pneumatic safety chuck is also has two types: flange mounted and pillow mounted. In this above picture, it is the flange mounted safety chuck. Chuck body is fixed on worktable by screws. There are two air inlet ports for each side, one is safety chuck open air inlet port, another is safety chuck close air inlet port. It is through control air supply into chamber to make chuck head open or close automatically.
This safety chuck is in couple, one without shaft, another with shaft, this shaft can connect with customer's motor, so as to transmit the power to the safety chuck. Automatic design, will help many enterprised reduce labor force, improve working efficience and prolong the motor service life. Square size holding mouth can be matched with square shape air shaft for easy loading and unloading, it is safe and convenient for operation.
In this customer usage case, it is the pneumatic safety chuck with end shaft connected with driving motor, another side is another one without end shaft, two pieces of safety chuck to carry steel bar for coil material rewinding and unwinding.
Following is the drawing and technical data of this pneumatic safety chuck:
Send Inquiry to This Supplier
You May Also Like
-
FLO/W35 Safety Chuck With End Shaft Alternative BoschertUS$ 200 - 1000MOQ: 1 Set
-
Replaceable VT Insert Safety Chuck With High QualityUS$ 200 - 1000MOQ: 1 Set
-
Flange Safety Chuck Connected With Pneumatic BrakeUS$ 200 - 1000MOQ: 1 Set
-
Pedestal Mounted Safety Chuck With Stand FootUS$ 200 - 1000MOQ: 1 Set
-
Pedestal Safety Chuck for Paper Core Loading and UnloadingUS$ 200 - 1000MOQ: 1 Set
-
Square Bar Holding Safety Chuck Matchs With Pneumatic ClutchUS$ 200 - 1000MOQ: 1 Set
-
Foot Stand Safety Chuck Connected With Air Shaft BrakeUS$ 200 - 1000MOQ: 1 Set
-
Core Roller Support Safety Chuck With Manual BrakeUS$ 200 - 1000MOQ: 1 Set
-
Seat Mounted Safety Chuck Equiped With ESB Manual BrakeUS$ 200 - 1000MOQ: 1 Set
-
Manual Safety Chuck Equiped With ESB Manual BrakeUS$ 200 - 1000MOQ: 1 Set
