Contact Platform Support
Help CenterABB UFC760BE42 (3BHE004573R0042) – Control Board for ABB Industrial Drives and System Upgrades
Related Products
-
ABB UNS0867A-P;V2 (HIEE405246R0002) – Advant DCS Communication/Controller Module for Reliable System UpkeepUS$ 5500.00MOQ: 1 Pallet -
ABB PPD512 (3BHE040375R1010) – High-speed Pulse/drive Control Board for ABB Industrial DrivesUS$ 11690.00MOQ: 1 Unit
-
ABB UNS0122A-P (3BHE042393R0101) – Plug-in Control Module for UNITROL/PEC-based Excitation and Converter SystemsUS$ 5600.00MOQ: 1 Unit
-
ABB XVC722AE101 (3BHB002751R0101) Control Board for ACS800 DrivesUS$ 3600.00MOQ: 1 Pallet
-
ABB UFC765AE102 (3BHE003604R0102) – High-reliability Controller/communication Board for ABB Symphony/Advant Harmony DCSUS$ 4216.00MOQ: 1 Blade
Warranty: 365 days
Delivery time: 1 week for in-stock items; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express options: FedEx, UPS, DHL
Dedicated ABB drive control logic – Designed for ABB drive platforms, supporting closed-loop control and internal interlocking so commissioning is straightforward in most cases.
Backplane-powered – Powered from the host drive/control rack; no separate PSU typically required, which simplifies wiring.
System bus and fiber links – Often used with ABB’s internal communication (including fiber-optic links within the cabinet) for reliable, noise-resistant signaling in harsh environments.
Supports fieldbus via add-ons – In many cases, integrates with fieldbus adapters (e.g., PROFIBUS DP, DeviceNet, Modbus) so you can match existing PLC networks without major rewiring.
Service-friendly – Plug-in form factor that allows quick swap during maintenance windows; ESD-safe handling recommended.
Firmware match compatibility – Typically requires matching firmware revision to your drive version for full functionality and predictable behavior.
| Brand / Model | ABB UFC760BE42 (Part No. 3BHE004573R0042) |
| Product Type | Drive control board (plug-in board for ABB industrial drive systems) |
| HS Code | 8538.90 (Parts suitable for use with 8535/8536/8537 apparatus) |
| Power Requirements | Powered via host drive/control backplane (nominal 24 VDC control rail; no external supply typically needed) |
| Operating Temperature | 0 to +55 °C inside a ventilated control cabinet (typical for ABB control boards) |
| Signal Input/Output Types | Internal system bus; fiber-optic control links used in many ABB drives; analog/digital feedback via mating harness depending on drive variant |
| Communication Interfaces | Integration with fieldbus adapters typically available (e.g., PROFIBUS DP, DeviceNet, Modbus) depending on system configuration |
| Installation Method | Plug-in board mounted in the drive control rack; secured with standoffs/screws; ESD-protected handling required |
| Dimensions & Weight | Compact board-level assembly; typically under 1 kg (exact size/weight depends on revision) |
This model is commonly used as a service replacement in ABB drive cabinets across:
Metals and rolling lines – steady torque control for continuous processes
Pulp & paper – coordinated drive sections with fiber-linked feedback
Cement and mining – conveyors, mills, and fans where electrical noise is present
Power generation auxiliaries – ID/FD fans, feed pumps with closed-loop regulation
Marine and oil & gas – enclosed cabinets with robust EMC requirements
A maintenance lead at a cement plant told us they keep one UFC760BE42 on hand because swapping it is faster than extended fault tracing when production is on the line. That’s usually the difference between a 2-hour stop and a full-day shutdown.
Reliability – ABB board-level spares are built for industrial duty; failure rates are low when cabinet conditions are within spec.
Compatibility – Designed to match established ABB drive platforms, reducing re-engineering risk during replacement.
Cost control – A targeted board swap typically costs less than a full drive retrofit and shortens downtime.
Technical support – Firmware and parameter alignment guidance available; we can help verify board revision and compatibility with your installed base.
Cabinet environment – Install in a clean, ventilated control cabinet. Keep ambient typically within 0–55 °C and maintain airflow around the drive stack.
ESD and handling – Use ESD wrist straps and antistatic packaging. Avoid touching component surfaces.
Wiring – Seat the board fully in the control rack; confirm all backplane and fiber connectors are fully latched. Route fibers and harnesses away from high-voltage busbars where possible.
Firmware & parameters – After installation, check firmware compatibility and restore/verify drive parameters. A brief test run at low load is usually recommended.
Routine care – Quarterly cabinet cleaning, connector reseat checks, and visual inspection for dust ingress or hot spots. Plan firmware updates only when validated for your drive revision.
Manufactured to ABB’s quality standards; board-level components intended for integration into CE/UL compliant ABB drive systems
RoHS-compliant manufacturing in most cases for these control assemblies
One-year (365-day) warranty coverage
Fieldbus adapters where applicable: PROFIBUS DP (RPBA-01), DeviceNet (RDNA-01), Modbus (RMBA-01) to match PLC networks
Fiber-optic control links for internal drive communication
Mounting hardware and backplane connectors specific to the target drive rack
If you share your drive type, firmware level, and existing board label, we can double-check compatibility for UFC760BE42 (3BHE004573R0042) before you place the order. That small step typically avoids commissioning surprises.
Send Inquiry to This Supplier
You May Also Like
-
ABB PM592-ETH (1SAP150200R0271) – High‑performance AC500 PLC CPU With Integrated Ethernet for Fast Control and Easy NetworkingUS$ 3376.00MOQ: 1 Pallet
-
ABB RMU610 (2VAA008425R1) – Remote Monitoring/Gateway Unit for Industrial AssetsUS$ 4200.00MOQ: 1 Unit
-
ABB UCD208A101 (3BHE020018R0101) – Control Board Module for ABB Power Electronics and Drive SystemsUS$ 2351.00MOQ: 1 Pallet
-
ABB PM591-ETH (1SAP150100R0270) – AC500 PLC CPU With Integrated Ethernet for Reliable Mid-range ControlUS$ 1300.00MOQ: 1 Pallet
-
ABB PM864AK01-eA (3BSE018161R2) – AC 800M Controller Kit for Demanding Process AutomationUS$ 4800.00MOQ: 1 Pallet
-
ABB PPD513A-23-111615 – Control System Module for Reliable Cabinet/Rack IntegrationUS$ 11620.00MOQ: 1 Unit
-
ABB REC650 (1MRK008514-CB) – Bay Control and Protection IED for Modern Substation AutomationUS$ 3600.00MOQ: 1 Unit
-
ABB PM877 (3BDH000777R1) – Processor Module for AC 800M / 800xA Control SystemsUS$ 25000.00MOQ: 1 Pallet
-
ABB PM633 3BSE008062R1 – Compact Processor Module for AC 800M-based Control SystemsUS$ 4250.00MOQ: 1 Pallet
-
REF615E_G HBFEAEAGNDA1ABA1XG FEEDER PROTECTION and CONTROL RELAYUS$ 2550.00MOQ: 1 Pallet
