Contact Platform Support
Help CenterABB 086348-001 – Legacy DCS Module for Bailey INFI 90 System Sustainment
Related Products
-
ABB 086370-001 – Legacy Bailey INFI 90 Spare Module for Stable DCS MaintenanceNegotiableMOQ: 1 Combo -
ABB 100472-012 – Plug-in Control Board for Legacy ABB Drive and DCS CabinetsNegotiableMOQ: 1 Combo
-
ABB 1MRB150003R0002 – Control/Feedback Board for ABB Drive and Motor SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150005R0001 — Motor Resolver Assembly for Precise Speed/Position FeedbackNegotiableMOQ: 1 Combo
-
ABB 1MRB150015R1 – OEM Replacement Component for ABB Motors/Drives MaintenanceNegotiableMOQ: 1 Combo
The ABB 086348-001 is a legacy control-system module used within Bailey INFI 90/NET 90 (Harmony) environments, typically as a like-for-like replacement to keep mature plants running safely and predictably. If you’re maintaining installed bases rather than migrating, this part helps you swap failing hardware with minimal disruption, fast.
From my experience, teams bring this in during planned turnarounds or to build a critical spare pool so one fault doesn’t turn into a long outage. It’s all about fit, stability, and keeping the control strategy unchanged.
Genuine ABB part number (086348-001) – Specified for legacy Bailey INFI 90/NET 90 (Harmony) systems in many installed bases.
Drop-in replacement – Typically installed 1:1 in the designated slot or mounting location per your cabinet drawings, without rewiring.
Process continuity – Keeps logic, loop tuning, and operator graphics intact; no application re-engineering for like-for-like swaps.
Lifecycle sustainment – Helps defer costly migrations while maintaining safe operation and spare-part coverage.
Documented install practice – Compatible with standard Bailey maintenance procedures and test routines used across the series.
| Brand / Model | ABB 086348-001 |
| System Compatibility | Bailey INFI 90 / NET 90 (Harmony) environments, as deployed in legacy cabinets |
| Power Requirements | Backplane or designated cabinet supply (per INFI 90 cabinet specifications) |
| Operating Temperature | Typically 0 to +60 °C when installed in a conditioned control cabinet |
| Signal I/O | Function depends on sub-assembly; confirm against site BOM and loop sheets |
| Installation Method | Fits the designated slot or mounting point as per Bailey drawings; follow ESD-safe handling |
You’ll typically see ABB 086348-001 used for sustaining legacy DCS nodes in:
Oil & Gas (midstream compression, refining units, offsite utilities)
Chemicals & Petrochem (batch units, reactors, tank farms)
Power Generation (balance-of-plant, water treatment, fuel handling)
Pulp & Paper and Metals (wet end control, drives interface, auxiliaries)
One maintenance lead told us they swapped an 086348-001 during a short outage window, verified I/O health checks, and brought the line back without touching the control logic—exactly the sort of low-drama fix most teams want.
Reliability – A like-for-like fit lowers the risk of unexpected behavior after replacement.
Compatibility – Maintains your existing Bailey architecture, controllers, and termination hardware.
Cost Avoidance – Extends asset life while deferring large-scale migration CAPEX.
Maintainability – Works with established site procedures, spares strategies, and test tools.
Support – Documentation and revision checks are straightforward when tied to the original part number.
Cabinet environment – Use in a dry, ventilated control cabinet; keep ambient within the typical 0–60 °C range, with clean power and proper grounding.
ESD and safety – De-energize the cabinet or affected segment before removal/installation. Wear an ESD wrist strap and avoid flexing the PCB.
Wiring & terminations – Match slot/terminal references to site drawings. If the module interfaces via a termination unit, verify terminal torque and shield routing.
Revision check – Confirm hardware/firmware revision alignment with your controller and peer modules; this avoids nuisance diagnostics.
Routine care – Periodically inspect for dust, loose connectors, or heat discoloration. If the function involves analog measurement, include it in loop checks and calibration schedules.
Manufacturing standards – Originally produced to ABB’s quality controls; many units were supplied into UL/CSA and CE-marked systems.
Compliance – Certification markings may vary by vintage; verify against your site’s documentation if you require specific approvals (UL, CE, CSA).
Warranty – For legacy spares, warranty terms typically depend on supply source and condition (new, surplus, or professionally refurbished). Many buyers standardize on 12 months for refurbished stock; we can align with your site policy.
Send Inquiry to This Supplier
You May Also Like
-
ABB 1MRB150020R0712 – OEM Bearing Component for ABB Large AC MotorsNegotiableMOQ: 1 Combo
-
ABB 1MRB150020R1102 – OEM Interface/Feedback Board for ABB Drive SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150021R0116 – Motor Feedback Unit for Precise Speed/Position ControlNegotiableMOQ: 1 Combo
-
ABB 1MRB150022 R0002Y – OEM Control/feedback Module for ABB Drive and Motor SystemsNegotiableMOQ: 1 Combo
-
ABB 1MRB150051R1 – Genuine Motor Bearing (Factory‑coded Spare for ABB Motors)NegotiableMOQ: 1 Combo
-
ABB 1MRB178009R0001 – OEM Spare Module for Motor/Drive Feedback and Assembly ReplacementNegotiableMOQ: 1 Combo
-
ABB 1MRK001967-AA – Field Accessory for Relion Protection & Control IED CommissioningNegotiableMOQ: 1 Combo
-
ABB 1SVR011700R0000 – Compact Control/Monitoring Relay for Reliable Panel AutomationNegotiableMOQ: 1 Combo
-
ABB 1MRK002133-ABr02 – Hardware Module for Relion Protection IEDsNegotiableMOQ: 1 Combo
-
ABB 1SFB536068D1011 – Industrial Contactor for Dependable Motor and Power SwitchingNegotiableMOQ: 1 Combo
