Tungsten Carbide Flow Control Components for Oil and Gas Industry, 6% Co Binder, 89.5 HRA
Product Spotlights
Winray New Materials Co., Ltd. is a manufacturer established in 2025 and based in Zhuzhou, Hunan, China, focused on tungsten carbide components for demanding industrial service. We produce tungsten carbide flow control components for oil and gas operations, using a 6% cobalt binder and a hardness of 89.5 HRA to support wear resistance and dimensional stability in repeated cycling. Our factory covers 1,000–3,000 square meters and serves buyers across North America, Europe, the Middle East, Southeast Asia, South America and other regions. This product is designed for choke, valve, nozzle and seat applications where erosion and abrasive flow can shorten component life. We welcome drawing-based customization and practical engineering discussion before order.
Product Overview
Tungsten carbide flow control components are used in oil and gas systems to manage pressure, direct flow and protect critical passages from abrasive media. The grade in this product uses 6% cobalt as the binder and reaches 89.5 HRA, a combination intended for parts that need wear resistance while maintaining a practical level of toughness. In field and process environments, flow control parts may face sand, slurry, high-pressure drops and frequent cycling. The exact balance of binder content, grain structure and final geometry matters, so we review the application before production. These components are suitable for choke trim, valve seats, nozzles, sleeves, restrictors and other wear-prone flow paths. We can machine parts to customer drawings and discuss tolerances, surface condition and inspection requirements during quotation.
Key Features and Buyer Benefits
- 6% Co binder: The cobalt content is selected for flow control parts that need a balance of wear resistance and mechanical stability in oil and gas service.
- 89.5 HRA hardness: This hardness level supports resistance to abrasion and erosive flow, helping extend service intervals in demanding passages.
- Oil and gas focus: Components are intended for choke, valve, nozzle and seat positions where pressure control and abrasive media are common concerns.
- Drawing-based customization: Dimensions, tolerances, surface finish and special features can be discussed against customer drawings or samples.
- Wear-resistant design intent: Tungsten carbide is chosen for critical wear areas where conventional materials may wear faster or require more frequent replacement.
- Practical quality communication: We review material grade, geometry and inspection points before production so buyers can align the part with the actual operating condition.
- Flexible order discussion: Trial quantities, repeat orders and project-based supply can be discussed according to the component type and drawing requirements.
Technical Specifications
| Item | Specification |
|---|---|
| Material | Tungsten carbide (WC-Co) |
| Binder content | 6% Cobalt (Co) |
| Hardness | 89.5 HRA |
| Component scope | Choke, valve, nozzle, seat and related flow control parts |
| Size and geometry | Customizable to drawing |
| Surface condition | As requested |
| Application | Oil and gas flow control |
| Certification documents | Available upon request |
The table above shows the confirmed base information for this product. Additional requirements such as drawing tolerances, edge preparation, surface finish, packaging and inspection records can be discussed before order. Please confirm the final specification in the quotation so both sides work from the same technical basis.
Applications and Operating Fit
Flow control components in oil and gas equipment often sit in areas where abrasive particles, pressure changes and repeated operation meet. A tungsten carbide grade with 6% Co and 89.5 HRA can be a practical choice for parts that need wear resistance without losing the ability to handle typical mechanical loads. Buyers can use these components in choke assemblies, valve trim, nozzle inserts, seat rings, restrictors, sleeves and other replaceable wear parts. The final fit depends on the drawing, the mating materials, the media and the maintenance plan. We recommend sharing the working pressure, media type, particle content, temperature range and expected cycle life so the component can be reviewed in context.
- Choke components: For flow restriction and pressure control where erosive media can wear internal passages.
- Valve seats and trim: For sealing and flow paths that need wear-resistant contact surfaces.
- Nozzles and restrictors: For directed flow and controlled passage sizes in abrasive service.
- Sleeves and wear parts: For replaceable protection in critical flow areas.
Customization, Inspection and Ordering
Because flow control components are often drawing-specific, we focus on clear technical communication before production. Please provide 2D drawings, 3D models if available, material grade requirements, hardness target, tolerance range, surface finish, quantity and any inspection points. If a drawing is not ready, we can discuss the operating conditions and key dimensions first. We can also review packaging needs for export shipment and confirm the required document list before dispatch. Our team works from Zhuzhou, Hunan, China, and can ship through Shenzhen, Shanghai, Hangzhou and Qingdao according to the order plan.
For buyers comparing suppliers, the important points are stable material grade, clear drawing review and practical follow-up. We keep the quotation process direct: confirm the drawing, confirm the specification, confirm the quantity and then arrange production. This approach helps reduce misunderstandings on custom carbide parts and supports repeat orders when the component fits the application.
Why Buyers Work With Winray
Winray New Materials Co., Ltd. operates a 1,000–3,000 square meter factory in Zhuzhou, Hunan, China, with an annual export value of US$1 Million–US$1.5 Million and shipments through Shenzhen, Shanghai, Hangzhou and Qingdao. Our team serves buyers in North America, South America, Eastern Europe, Southeast Asia, the Middle East, Eastern Asia, Western Europe, Central America, Northern Europe, Southern Europe and South Asia. With 5–10 employees, we keep communication direct and project-focused. Share your drawing, operating conditions and target quantity, and we will recommend a practical tungsten carbide flow control solution for your oil and gas application.
FAQ
Q: What does 6% Co binder mean for oil and gas flow control components?
A: Cobalt is the binder that holds the tungsten carbide grains together. A 6% Co grade is often chosen when the part needs wear resistance plus a practical level of toughness for flow control service. The final suitability depends on the media, pressure and part design.
Q: Is 89.5 HRA suitable for abrasive flow conditions?
A: 89.5 HRA is a hardness level intended to support resistance to abrasion and erosion. It can be suitable for choke, valve and nozzle parts in oil and gas equipment, but the operating conditions should be reviewed before confirming the grade.
Q: Can you produce components to our drawings?
A: Yes. We can review 2D drawings, 3D models, samples and key dimension lists. Custom dimensions, tolerances, surface finish and special features can be discussed before quotation.
Q: Which flow control parts can you supply?
A: We can discuss choke components, valve seats, valve trim, nozzles, restrictors, sleeves and other tungsten carbide wear parts for oil and gas flow paths. Please share the drawing or application details for a specific review.
Q: Can you provide certification documents?
A: Certification documents are available upon request. Please confirm the exact document list required for your market and order before shipment so we can check availability.
Q: What information is needed for a quotation?
A: Please provide the drawing, material grade, hardness target, dimensions, tolerance, surface finish, quantity and any inspection requirements. If available, include the working pressure, media type and temperature range for a more practical review.
Q: How are the parts packed and shipped?
A: Packaging can be discussed according to part size, quantity and transport method. We can ship through Shenzhen, Shanghai, Hangzhou and Qingdao, and we will confirm the packing plan and document list before dispatch.
Q: Can you support trial orders?
A: Trial quantities can be discussed for suitable drawings and specifications. The order plan depends on the component type, production requirements and quantity, so please share your target quantity for review.
Send Inquiry to This Supplier
You May Also Like
-
Custom Carbide Punch Tips for Precision PunchingNegotiableMOQ: 1 Unit
-
Wear-Resistant Carbide Die Buttons for Progressive Dies ISO 9001 CarbideNegotiableMOQ: 1 Unit
-
Custom Precision Tungsten Carbide Guide Bushings for Mold AlignmentNegotiableMOQ: 1 Unit
-
Non-Magnetic Carbide Grades for Specialized MoldsNegotiableMOQ: 1 Unit
-
Non-Magnetic Nickel-Bonded Cemented Carbide Molds, Submicron Grain, Mirror Polished CavitiesNegotiableMOQ: 1 Blade
-
Non-Magnetic Nickel-Bonded Tungsten Carbide Molds, Submicron Grain, Wear-Resistant for High-Load PressingNegotiableMOQ: 1 Blade
-
Nickel-Bonded Non-Magnetic Cemented Carbide Molds With Technical Training and Free Repair ServiceNegotiableMOQ: 1 Blade
-
Nickel-Containing Non-Magnetic Carbide Molds, HIP-Sintered and Precision-Ground for Dimensional StabilityNegotiableMOQ: 1 Blade
-
Nickel-Bonded Non-Magnetic Cemented Carbide Molds for Corrosive Powder Compacting in Chemical EquipmentNegotiableMOQ: 1 Blade
-
Nickel-Containing Cemented Carbide Molds, Non-Magnetic, Tight Tolerance ±0.005 Mm, Ra 0.2 μmNegotiableMOQ: 1 Blade

