Contact Platform Support
Help CenterABB DSTA131 (Y57120001-CV) – Communication/Bus Interface Module for Advant/Master DCS
Related Products
-
ABB DSQC679 (3HAC028357-001) – IRC5 Controller Board for Robot Control/Interface ExpansionUS$ 1360.00MOQ: 1 Combo -
ABB DST YW121 (3BSE007836R1) – Industrial Control Module for ABB DCS/800xA CabinetsUS$ 1360.00MOQ: 1 Combo
-
ABB DTDX991A (61430001-UW) – Digital I/O Termination Unit for Bailey INFI 90 / NET 90 CabinetsUS$ 1360.00MOQ: 1 Combo
-
ABB DTCC901B (61430001-FU) – Communication Controller Module for Advant/MB300 NetworksUS$ 1360.00MOQ: 1 Combo
-
ABB DYSF118B (61430001-XG) – Control Interface Board for Installed ABB Drive/DCS PlatformsUS$ 2360.00MOQ: 1 Combo
Warranty: 365 days
Lead time: 1 week for in-stock items; no more than one month at the latest
Payment terms: 50% advance payment, full payment before delivery
Express options: FedEx, UPS, DHL
| Brand / Model | ABB DSTA131 (Y57120001-CV) |
| Product Type | Communication/Bus Interface Module for ABB Advant/Master racks |
| HS Code | 853890 (Parts for electrical control/switchgear) |
| Power Requirements | Backplane powered; typically 5 VDC nominal from rack PSU |
| Operating Temperature | 0 to +55 °C (typical for ABB rack modules) |
| Signal I/O Types | Interface module; no direct analog/digital field channels |
| Communication Interfaces | Backplane system bus interface for Advant/Master; external service/diagnostic indicators on front (revision-dependent) |
| Installation Method | Plug-in module; mounts in ABB Advant/Master rack (single-slot width) |
Plants typically use the DSTA131 in legacy ABB DCS areas that still need reliable bus communication: power generation (boiler/turbine auxiliaries), oil & gas (compressor stations, utilities), pulp & paper (stock prep, winder lines), chemicals (batch/reactors), and metals/cement lines. It’s a solid fit for life-extension projects where the control strategy stays the same, but you want predictable spares and minimal rewiring risk.
A maintenance lead at a paper mill told us they swapped a DSTA131 during a night shift and had the I/O segment back within 20 minutes—no field terminations touched. That kind of turnaround is why many facilities keep this module on the shelf.
Reliability: Proven in continuous-process duty cycles; consistent behavior across firmware vintages.
Compatibility: Works within ABB Advant/Master racks, enabling incremental upgrades rather than full system replacement.
Cost control: Extends asset life and defers major CAPEX; reduces re-engineering and commissioning time.
Serviceability: Plug-in design with clear status indication shortens MTTR.
Technical support: We provide testing reports on request and can pre-check modules to your revision preference when available.
Cabinet environment: Install in a clean, dry enclosure; allow adequate ventilation and maintain ambient temperature within 0–55 °C.
Rack requirements: Use the designated ABB Advant/Master rack slot; ensure backplane connectors are clean and undamaged.
Wiring: As a bus/interface module, field wiring is not typically landed on the module; verify correct grounding and shielding of the cabinet and rack PSU.
Safety: Isolate power before insertion/removal unless your system and procedures explicitly support online replacement.
Routine checks: Inspect front-panel indicators, reseat if intermittent faults occur, and keep connectors dust-free. Firmware/config alignment should be verified during turnarounds.
Certifications: CE compliant; RoHS and UL/CSA recognition may vary by manufacturing revision.
Testing: Units are function-tested before shipment when requested; inspection reports available.
Warranty: 365-day warranty from our side; manufacturer coverage applies to factory-new stock if applicable.
ABB Advant/Master rack and PSU modules (for proper backplane power and bus integrity)
I/O modules such as DSAI (analog input) and DSDO/DSDI (digital output/input) for complete channel coverage
Controller boards in the same family (for redundant or expanded architectures)
Send Inquiry to This Supplier
You May Also Like
-
ABB DYPS154C (61430001-YP) – Compact Power Supply Board for ABB Drive & Control RacksUS$ 2360.00MOQ: 1 Combo
-
ABB DYTP123A (61430001-TW) Touch Panel – Replacement HMI Front Module for ABB Operator TerminalsUS$ 2360.00MOQ: 1 Combo
-
ABB DYTP600A (61430001-ZY) Touch Panel HMI – Reliable 6-inch Operator Interface for Machine and Process ControlUS$ 2360.00MOQ: 1 Combo
-
ABB EI803F (3BDH000017R1) – S800 I/O Interface Module for 800xA/Advant SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB EI802F 3BDH000016R1 – Ethernet Interface Module for AC 800F / Freelance Controller NetworksUS$ 1360.00MOQ: 1 Combo
-
ABB EI801F (3BDH000015R1) – Ethernet Interface Module for AC 800F / Freelance SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB EI811F (3BDH000020R1) – Ethernet Interface Module for ABB Freelance/AC 800F Control NetworksUS$ 1360.00MOQ: 1 Combo
-
ABB FC95-22 (HESG440295R2 / HESG448688R22) – Procontrol P14 Control Module for Reliable DCS OperationUS$ 1360.00MOQ: 1 Combo
-
ABB EI812F (3BDH000021R1) – Ethernet Interface Module for Freelance AC 800F Control SystemsUS$ 1360.00MOQ: 1 Combo
-
ABB EST125-975 + DCC2382A – Motor Feedback and Control Interface for ABB Drive SystemsUS$ 2360.00MOQ: 1 Combo
