Contact Platform Support
Help CenterBently Nevada 132417-01 Vibration Monitoring Module – Machine Protection and Condition Monitoring for Critical Rotating Assets
Related Products
-
Bently Nevada 135489-01 I/O Module – Rear I/O Termination for 3500 Machinery Protection RacksUS$ 3216.00MOQ: 1 Blade -
Bently Nevada 135462-01 – 16‑Channel Relay Module for 3500 Machinery Protection RacksUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 135137-01 Positions I/O Module – Reliable Field Termination for Position Transducers in Critical Machinery MonitoringUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 132419-01 Four Channel Monitor – Reliable 4‑channel Machinery Protection and Condition Monitoring for 3500 SystemsUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 135489-02 (3500/92) Communication Gateway – Modbus TCP/RTU Bridge for 3500 Machinery Protection RacksUS$ 3216.00MOQ: 1 Blade
Warranty: 365 days
Delivery time: 1 week if in stock; no more than one month at the latest
Payment: 50% advance payment; full payment prior to delivery
Express delivery: FedEx, UPS, DHL
Continuous vibration monitoring – Designed for round-the-clock protection of turbines, compressors, pumps, and fans where shutdown risk must be minimized.
Multi-sensor compatibility – Works with proximity probes and seismic/accelerometer inputs (depending on I/O option), making it easy to standardize across mixed fleets.
Dual-level alarms – Alert and Danger setpoints per channel are typically available for precise trip logic and operator awareness.
Buffered outputs – Buffered dynamic signal available on the I/O module for portable analyzers and diagnostics without disturbing the process.
System integration – Communicates through the rack to the 3500/22M comms interface for Ethernet connectivity to DCS, PLC, or condition monitoring software.
Proven reliability – Industrial-grade design with long service life; seems to be a common choice in API 670-style machine protection architectures.
| Brand / Model | Bently Nevada 132417-01 |
| Product Type | Vibration Monitoring Module (for Bently Nevada machine protection racks) |
| HS Code | 903180 (Measuring/monitoring instruments) |
| Power Requirements | Supplied via the Bently Nevada rack backplane (no external power to the front module) |
| Signal I/O Types | Dynamic vibration inputs from proximity probes or accelerometers (per I/O option); buffered output available on the I/O module; OK/Alarm/status via rack |
| Communication Interfaces | Via the system communications module (e.g., 3500/22M) for Ethernet/Modbus TCP and condition monitoring software connectivity |
| Installation Method | Front monitor card + matching rear I/O module; installs in standard Bently Nevada 19-inch rack slot with screw/plug terminals on the I/O |
| Operating Temperature | Typically 0 to +65 °C for rack-mounted modules (refer to the specific datasheet for exact limits) |
| Dimensions & Weight | Standard Bently Nevada rack-slot module (front card + rear I/O); same form factor as other 3500 monitors |
This module fits best where continuous vibration protection and trending is non-negotiable:
Oil & gas: gas compressors, turbine trains, pipeline pump stations
Power generation: steam/gas turbines, generator bearings, ID/FD fans
Chemicals & refining: critical pumps, agitators, and expanders
Pulp & paper, mining & metals: large motors, blowers, and mill drives
Water & wastewater: high-duty pumping assets in unattended stations
A maintenance lead at a combined-cycle plant told us: “We standardized on this monitor across two units. The buffered output makes field analysis straightforward, and our trip logic has been rock solid.”
Compatibility – Works within the Bently Nevada protection architecture, simplifying spares and training.
Reliability – Industrial design with proven uptime in harsh environments, which in many cases reduces nuisance trips.
Lifecycle savings – Standardized modules mean faster replacement and less engineering effort during turnarounds.
Data clarity – Clean vibration signals and buffered outputs support better diagnostics and earlier fault detection.
Integration flexibility – Communicates through the rack to DCS/PLC/SCADA and condition monitoring platforms without awkward gateways.
Panel/Rack – Install in a Bently Nevada rack mounted in a clean, dry cabinet; allow ventilation and avoid high EMI sources.
I/O Pairing – Ensure the correct rear I/O module for your sensor type (proximity or accelerometer) and wiring style.
Wiring – Use shielded, twisted pairs for sensor leads; ground shields at one end; maintain tight routing away from power cables.
Configuration – Set Alert/Danger setpoints, filtering, and logic per machine standards; verify OK/status before startup.
Routine care – Periodically check terminal torque, clean dust from the rack, verify sensor bias/OK, and back up configuration files.
Firmware – When applicable, keep system firmware aligned across rack modules; update during scheduled outages.
Safety – De-energize the rack slot before changing I/O wiring; follow site LOTO and ESD handling practices.
Manufacturer quality system: ISO 9001
Typical compliance: CE marking; UL/cUL for industrial control equipment
RoHS: commonly compliant for monitoring electronics (check the exact build revision)
Manufacturer warranty: typically 1 year (may vary by region and contract)
One thing I appreciate is how easily this module drops into existing Bently Nevada racks without rethinking the full protection strategy. If your scope includes proximity probes (shaft vibration/position) or accelerometers (casing vibration), this model streamlines both protection and diagnostics with minimal wiring changes.
Send Inquiry to This Supplier
You May Also Like
-
Bently Nevada 135489-04 I/O Module – Rear I/O Interface for 3500-series Vibration and Machinery ProtectionUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 140734-05 Dynamic Pressure Monitor (3500/72M)US$ 3216.00MOQ: 1 Blade
-
Bently Nevada 1900/27 Series Vibration Monitor – Compact, Reliable Protection for General-Purpose Rotating MachineryUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 136719-01 Earthing I/O Module – Reliable Shield Grounding for 3500 RacksUS$ 2216.00MOQ: 1 Blade
-
Bently Nevada 1900/55 Fan Monitor – Purpose-built Protection and Condition Monitoring for Industrial FansUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 1900/65A-00-00-01-00-00 General Purpose Equipment Monitor – Compact Machinery Protection for Pumps, Fans, and MotorsUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 1900/65A-00-00-02-00-01 – General Purpose Equipment Monitor for Reliable Vibration ProtectionUS$ 3216.00MOQ: 1 Blade
-
Bently Nevada 330104-00-13-10-02-CN – 3300 XL 8 mm High‑Accuracy Proximity Probe for Critical Machinery MonitoringUS$ 216.00MOQ: 1 Blade
-
Bently Nevada 1900/65A-00-04-01-00-00 – General Purpose Equipment Monitor for Reliable Machinery ProtectionUS$ 216.00MOQ: 1 Blade
-
Bently Nevada 3500/70M Recip Impulse Velocity Monitor – Targeted Impact Monitoring for Reciprocating MachineryUS$ 3216.00MOQ: 1 Blade
