Contact Platform Support
Help CenterGeneral Purpose Bucket 1.8 CBM With Bolt On Teeth Corner Cutters for Excavator Attachment Digging
Product Spotlights
Related Products
-
Excavator HD Bucket CAT 355 4.5 CBM Heavy Duty Digging Bucket for 55 Ton Excavator AttachmentUS$ 6000 - 8000MOQ: 1 Piece -
Heavy Duty Bucket 4.5 CBM for CAT 355 Excavator Bulk Excavation Loading Fit Excavator AttachmentUS$ 6000 - 8000MOQ: 1 Piece
-
Heavy Duty Digging Bucket 4.5 CBM With Bolt On Teeth Reinforced Shell for Excavator AttachmentUS$ 6000 - 8000MOQ: 1 Piece
-
Heavy Duty Digging Bucket 4.5 CBM With Bolt On Teeth Reinforced Shell for Excavator AttachmentUS$ 6000 - 8000MOQ: 1 Piece
-
Excavator Hydraulic Grapple Bucket With Teeth Thumb Attachment for Material HandlingUS$ 3000 - 3500MOQ: 1 Piece
XZFT Attachments' excavator digging bucket:
It's the general purpose bucket that normally comes with teeth, and it is suitable for digging, loading, and moving various materials like soil, sand, and loose rock.
Characteristics:
The body is a wide, deep shell with a rounded back at one point eight cubic metres, which is the geometry that gives a full load in bulk soil, sand and gravel on a 36 ton class carrier.
The teeth are on bolt on adapters rather than welded straight to the edge, so the points and the adapters are renewable parts and the edge is not cut back at every change.
Corner cutters are bolted at both sides of the edge, so the corners that grind along the face on every pass are protected by parts that unbolt.
Wear segments are welded along the curved side plate edges, the line the bucket drags over abrasive ground, so the shell plate is not the part that is consumed.
Nothing has to be plumbed in: the bucket pins to the linkage of a CAT 336 class machine as a plain mechanical attachment, and the teeth, adapters and corner cutters are the service parts.
| Type | Description | Working Condition |
| Standard Bucket | Q345B/Q355 + NM400 | Light duty works, such as digging and loading earth, sand, loose rock and gravel etc. |
| Normalteeth, adaptors, side cutters | ||
| Heavy Duty Bucket | Q355+ NM400 | Stronger and heavier than the GP bucket, HD bucket is for heavier excavating in hard and slightly rocky soil. |
| Thicker plate and higher quality parts ( Rock teeth, adaptors, side cutters) | ||
| Rock Bucket | Q355 + NM400 / NM 500 | Rock buckets suitable for heavier working conditions in rocky types of soil and demolition works. It's wear-resistant for rocky works. |
| Rock teeth, adaptors, side cutters and protectors, wear resisting strips, casting protecting blocks | ||
| Heavy Reinforced Duty Rock Bucket | Q355 / Q460 / Q690 + NM400/NM500 (or HARDOX400 / 500） | Strongest among the buckets above, HRD rock bucket suits the most extreme construction conditions. |
| Rock teeth, adaptors, side cutters, more wear resisting strips, casting protecting blocks, lip protectors between teeth | Applied for highly abrasive cases such as severe rock, providing highest level wear protection. |
Main products: Excavator standard bucket, heavy duty bucket, rock bucket, sieve bucket, mud bucket, tilt bucket, rake bucket, ripper ect.
More excavator attachment for choosing: V shape bucket, rotating screen bucket, vibrating compactor, rotating stone grapple, hydraulic grapple, quick coupler, hydraulic shears, concrete pulverizer, asphalt drum cutter, crusher bucket and so on; also supply skid steer loader buckets, sweeper, pallet fork and more.
XZFT ATTACHMENTS--China excavator buckets supplier
Email address: sales@xzftmachines
WhatsApp: +8618361571205
Send Inquiry to This Supplier
You May Also Like
-
Hydraulic Grapple Bucket for Excavator Attachment Land Clearing Debris HandlingUS$ 3000 - 3500MOQ: 1 Piece
-
Excavator Grapple Bucket With Hydraulic Cylinder Serrated Thumb and Replaceable TeethUS$ 3000 - 3500MOQ: 1 Piece
-
Excavator Mud Bucket Wide Ditching Bucket for Trench Cleaning Leveling AttachmentUS$ 150 - 300MOQ: 1 Piece
-
Mud Bucket for Excavator Ditch Cleaning Grading Wide Scoop Bucket AttachmentUS$ 150 - 300MOQ: 1 Piece
-
Wide Mud Bucket With Straight Cutting Edge and Top Tube for Excavator Attachment CleaningUS$ 150 - 300MOQ: 1 Piece
-
Excavator HD Bucket XCMG 215 1.0 CBM Heavy Duty Digging Bucket for 21 Ton Excavator AttachmentUS$ 1000 - 2000MOQ: 1 Piece
-
Heavy Duty Bucket 1.0 CBM for XCMG 215 Excavator Stony Ground Digging AttachmentUS$ 1000 - 2000MOQ: 1 Piece
-
Heavy Duty Digging Bucket 1.0 CBM With Bolt On Teeth Side Cutters for Excavator AttachmentUS$ 1000 - 2000MOQ: 1 Piece
-
Mini Excavator Buckets Digging Bucket Fit for 0.8 Ton 1.5 Ton 1.7 Ton 1.8 Ton Machines Wide 150mm -300mmUS$ 50 - 150MOQ: 1 Piece
-
Factory Wholesale 3.5 Ton Excavator Standard Buckets Suit for SY35 SK35 PC35 CAT303 Machines GP Bucket Ground BucketsUS$ 80 - 200MOQ: 1 Piece
